logo
products

238-0479 2380479 Heater Air Filter for D10T Tractor

ข้อมูลพื้นฐาน
สถานที่กำเนิด: จีน
ชื่อแบรนด์: jiajue
หมายเลขรุ่น: ดี10ที
จำนวนสั่งซื้อขั้นต่ำ: 1ชิ้น
ราคา: 15USD
เวลาการส่งมอบ: 1-3วันทำการ
เงื่อนไขการชำระเงิน: ที/ที
สามารถในการผลิต: 1,000 ชิ้น / เดือน
ข้อมูลรายละเอียด
เน้น:

D10T tractor air filter

,

Excavator heater air filter

,

238-0479 replacement air filter


รายละเอียดสินค้า

Product Overview
238-0479 2380479 Heater Air Filter for D10T Tractor
Product Specifications
Product Name Heater Air Filter
Part Number 238-0479
Brand Name JIAJUE
Model Compatibility D10T
Condition New
Availability Rich Stock
Approximate Weight 3KG
Size (per unit) 12cm x 8cm x 5cm
Delivery Time Usually delivered within 1-3 days after payment
Product Images
238-0479 2380479 Heater Air Filter for D10T Tractor 0 238-0479 2380479 Heater Air Filter for D10T Tractor 1 238-0479 2380479 Heater Air Filter for D10T Tractor 2
Frequently Asked Questions
Q1: How do I install my fuel injector after purchasing it?
Please refer to the "Step-by-Step Installation Guide" on our product details page, which contains detailed installation instructions.
Q2: What precautions should I take before installing my fuel injector?
The installation environment must be dust-free; lubricate the O-ring with clean machine oil before installation to prevent oil leakage; and ensure the O-ring is installed correctly.
Q3: Why is my engine still unusable after replacing the fuel injector?
This is commonly due to air trapped in the high-pressure oil rail. Cycle the engine in short bursts (no more than 30 seconds) to purge air. It may take several attempts to stabilize pressure.
Q4: Is my device compatible with this part number of fuel injectors?
If unsure about compatibility, please provide your Engine Serial Number (ESN) for free verification.
Q5: How to determine if your fuel injectors need replacing?
  • Cylinder Cut-out Test: Using diagnostic software (ET), shut off cylinders one by one and observe engine speed fluctuations to locate faulty cylinders.
  • Fuel Rail Pressure Test: Check for internal leaks preventing system from building critical starting pressure.
  • Back-leakage Test: Excessive back-leakage indicates severe wear of internal control valve assembly.
  • Visual Inspection: Inspect fuel injector nozzles for carbon buildup, blockage, or corrosion.
Q6: How long will it take to receive my package after I make the payment?
Delivery time depends on your country, region, and customs clearance. Contact us with your address and postal code for shipping costs and estimated delivery time.
Step-by-Step Installation Guide
Pro-Tip: HEUI (Hydraulic Electronic Unit Injection) systems are extremely sensitive to contamination. A single speck of dust can cause premature failure.
1. Preparation: Clean the injector bores thoroughly. Ensure there is no carbon debris, old O-rings, or fuel/oil residue at the bottom of the seat. Inspect the injector sleeve for any signs of pitting or erosion.
2. Lubrication: Apply clean engine oil to the three O-rings and the backup rings. Never use grease. Only use clean engine oil to ensure the seals slide in without tearing.
3. Seating the Injector: Push the injector down firmly by hand until you feel it "seat." Install the hold-down clamp and bolt.
4. Torque Specifications: Tighten the bolt to 30 N⋅m±7 N⋅m (22 lb-ft). Over-tightening can crack the injector body; under-tightening causes combustion gas leakage.
5. Trim Code Programming: Locate the 6-digit alphanumeric code on the top of the injector solenoid. Use ET (Electronic Technician) software to program this code into the ECM to ensure precise fuel delivery synchronization.
Troubleshooting Guide
Issue Root Cause Solution
Black Smoke Poor spray atomization or stuck needle valve causing dripping Inspect the air filter
Hard Start Internal leakage in injector leading to insufficient starting oil pressure Inspect injector O-rings and internal seals
Engine Misfire Faulty solenoid valve coil or worn internal valve components Inspect wiring harness connections and replace damaged injectors
Manufacturer Information
238-0479 2380479 Heater Air Filter for D10T Tractor 3
JIAJUE specializes in manufacturing high-quality industrial components with state-of-the-art production facilities and rigorous quality control processes.
Industry Exhibitions
238-0479 2380479 Heater Air Filter for D10T Tractor 4 238-0479 2380479 Heater Air Filter for D10T Tractor 5
Packaging & Shipping
238-0479 2380479 Heater Air Filter for D10T Tractor 6 238-0479 2380479 Heater Air Filter for D10T Tractor 7
All products are carefully packaged to ensure safe delivery and are shipped through reliable logistics partners for timely arrival.

รายละเอียดการติดต่อ
Lisa Wen

หมายเลขโทรศัพท์ : +8613622282109

วอทแอป : +8618926191673