logo
products

332/K6848 Controller ECU Control Unit for Excavator Spare Parts

ข้อมูลพื้นฐาน
สถานที่กำเนิด: จีน
ชื่อแบรนด์: Jiajue
หมายเลขรุ่น: 332/K6848
จำนวนสั่งซื้อขั้นต่ำ: 1 ชิ้น
รายละเอียดการบรรจุ: 332/K6848 ชุดควบคุม ECU สำหรับชิ้นส่วนอะไหล่รถขุดบรรจุในบรรจุภัณฑ์ส่งออกมาตรฐานภายใต้ความต้องการของล
เวลาการส่งมอบ: 1-5 วันทำการ
เงื่อนไขการชำระเงิน: L/C,D/A,D/P,T/T,เวสเทิร์นยูเนี่ยน,
สามารถในการผลิต: 100 ชิ้น / เดือน
ข้อมูลรายละเอียด
ชื่อสินค้า: คอนโทรลเลอร์ วัสดุ: เหล็ก
สถานที่กำเนิด: กวางตุ้ง จีน ขั้นต่ำ: 1
โอม: สนับสนุน
เน้น:

Excavator ECU control unit

,

ECU controller for excavator

,

Excavator spare parts controller


รายละเอียดสินค้า

332/K6848 Controller ECU Control Unit for Excavator Spare Parts
Product Overview

332/K6848 Controller ECU Control Unit for Excavator Spare Parts

Product Name Controller ECU
Part Number 332/K6848
Brand Name JIAJUE
Model /
Condition Used
Availability Rich Stock
Approximate Weight 3KG
Size (per unit) 25cm x 20cm x 15cm
Delivery Time Usually delivered within 1-3 days after payment
Product Images
332/K6848 Controller ECU Control Unit for Excavator Spare Parts 0 332/K6848 Controller ECU Control Unit for Excavator Spare Parts 1 332/K6848 Controller ECU Control Unit for Excavator Spare Parts 2 332/K6848 Controller ECU Control Unit for Excavator Spare Parts 3
Related Products
332/K6848 Controller ECU Control Unit for Excavator Spare Parts 4
Frequently Asked Questions
Q1: How long does it take to install the ECM on machine?
  • Physical Installation: 15-30 minutes. The unit is typically secured by 4 bolts on the cool side of the engine.
  • Programming & Testing: 30-60 minutes.
Pro Tip: If the ECM is pre-programmed by us based on your machine's serial number, it is essentially "Plug & Play." If not, you will need a ET (Electronic Technician) tool to flash the software, which takes additional time. We recommend professional installation to ensure correct parameter synchronization.
Q2: How to determine if the ECM is faulty and needs replacement?
  • The ET diagnostic tool cannot communicate with the ECM, or it displays a "Module Not Responding" error. This is a critical sign of internal hardware failure.
  • Active fault codes related to internal memory (EEPROM) or voltage reference issues that persist after checking the wiring harness often indicate ECM failure.
  • Sudden engine stalling, severe power loss (Limp Mode), or persistent misfiring (missing injector driver signals) after sensors and harnesses have been ruled out.
  • Visible signs of overheating (burning smell), water ingress, corrosion, or broken pins on the connector headers.
Q3: What's your payment method?

Our payment methods include T/T, L/C, PayPal, etc.

Q4: Do you have stock?

Rich stock available.

Q5: How can I know my order is already shipping?

When the goods ship, we will share the tracking number. For sea or air freight, we can provide the bill of lading.

Step-by-Step Testing Guide
Pro-Tip: HEUI (Hydraulic Electronic Unit Injection) systems are extremely sensitive to contamination. A single speck of dust can cause premature failure.
  1. Prepare: Ensure the excavator is turned off and safely secured. Disconnect the battery to avoid electrical accidents.
  2. Inspect: Check the ECU for physical damage or loose connections.
  3. Connect Diagnostic Tool: Use a diagnostic tool recommended by the excavator's manufacturer. Connect it to the ECU according to the tool's instructions.
  4. Read Codes: Use the diagnostic tool to read any error codes (DTCs) stored in the ECU. These codes indicate potential problems with the ECU or connected systems.
  5. Check Live Data: View live data parameters such as sensor readings and system voltages. Ensure they are within normal ranges.
  6. Functional Tests: If possible, perform tests to activate components or simulate sensor inputs. Verify that the ECU responds correctly without delays or errors.
  7. Reset (if needed): Reset the ECU if recommended by the manufacturer, especially after repairs or replacements.
  8. Document: Keep a record of all tests, codes, and results for future reference.
Quick Checklist for Buyers
Before replacing the ECM, always check the fuses, main relays, and ground connections. In many cases, a faulty ground wire or low battery voltage mimics an ECM failure.
Company Profile
332/K6848 Controller ECU Control Unit for Excavator Spare Parts 5
Exhibition
332/K6848 Controller ECU Control Unit for Excavator Spare Parts 6 332/K6848 Controller ECU Control Unit for Excavator Spare Parts 7
Packaging & Shipping
332/K6848 Controller ECU Control Unit for Excavator Spare Parts 8 332/K6848 Controller ECU Control Unit for Excavator Spare Parts 9

รายละเอียดการติดต่อ
Camille

หมายเลขโทรศัพท์ : +8613622282109

วอทแอป : +8618926191673